Eurotek ET 30 is an industrial strength, low viscosity lubricant, and penetrant designed to quickly loosen and free seized, bound, or frozen fasteners. It quickly permeates rust, scale, gum, grease, and corrosion with a low surface tension formula that creeps into cracks, seams, threads, and joints with great efficiency. Eases the disassembly of plant machinery, tools, and equipment for routine…
Eurotek ET 40 lubricates moving parts such as hinges, wheels, rollers, chains, and gears. It protects against rust and corrosion on items like tools, and sporting equipment. It penetrates to free stuck corroded parts like nuts, bolts, valves, and locks. It quickly removes adhesives, corrosion, and paint. It displaces moisture to restore water-flooded equipment such as engines, spark plugs, and…
Eurotek ET 50 forms a clear thin non-drying lubricating film that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a protective film to seal out further moisture and corrosion. Provides long-term indoor protection to surfaces for up to 6 months. Very effective corrosion inhibitor and assures complete surface protection from water, oxygen, and rust. Safe,…
Eurotek ET 90 is a soft waxy film-type corrosion inhibitor for providing long-term indoor and outdoor surface protection to all metals and components for up to 2 years. It is highly resistant to humidity and salt spray and forms a protective shield against rust, moisture, and corrosive influences. Its heavy-duty formulation provides both lubrication as well as corrosion protection to…
Eurotek Glass cleaner is a professional strength foaming formula that acts quickly to remove, dirt, grime, grease, fingerprints, and smoke haze from glass, Perspex, Plexiglas, and mirrors, leaving a streak-free finish. Eurotek glass cleaner is formulated for heavy-duty and industrial applications. • Foaming-Clings to vertical surfaces and minimizes run-off. • Ready to use-no preparation downtime required. Packing Available 400 ml,…
Eurotek gun cleaner is specially formulated to clean gun and gun parts. Provides mild lubrication and corrosion protection. Loosens jammed parts. Remove rust. Easily and effectively degreases, and removes, oil, dirt, wax, and other foreign matter that can cause failures. Downtime is minimized by cleaning without disassembly. Packing Available 150 ml 500 ml, 700 ml Case Pack 48 Can…
Eurotek Hard surface cleaner is a specifically design formula that acts quickly to remove, dirt, grime, grease, and stains from hard surfaces. Eurotek Hard surface cleaner is formulated for heavy-duty and industrial applications. • Non-Fuming Formula. • Concentrated can be diluted with water to make gallons of cleaner. Packing Available 5 ltr 20 ltr, 200 ltr Case Pack 4 Can…
A non-flammable and non-conductive fast-acting heavy-duty cleaner/degreaser mechanical component. It quickly penetrates tight spaces and minute crevices to dislodge oils, greases, moisture, and other light contaminants through its superior high-powered cleaning action. Eurotek Heavy duty Parts cleaner has a distinct advantage over flammable cleaners of having no flash point thereby increasing usage safety and enables equipment to be used faster…
A high-temperature resistant paint for use in high-temperature situations. This paint has been formulated for use when elevated temperatures are expected. It can be used on engine blocks, exhaust manifolds, brake drums, wood-burning stoves, boiler flue pipes, and in many other instances. Based on a silicone-modified alkyd, when cured, the resins burn off leaving a heat-resistant silicone matrix. A quick-drying,…
A solvent-based general cleaner of metal molds, in-place or clean-up prior to storage. Removes all grease, oil, and other soils that cause molding imperfections. Does not leave a residue, and won’t interfere with molding operations. • Evaporates quickly and leaves No Residue. • Suitable for Hot and Cold Molds. • Improves product surface finish. • Non-staining & non-corrosive. Packing Available…
Eurotek Mold Guard Spray has a unique, extra-dry spray package, which delivers a dry, non-silicone, non-wax, and non-penetrating protective coating onto the mold surface including ejector pin sleeves, slides, cams and other moving mold components. This special dry mist will not bleed out and prevents the marking of plastic parts when molds are put back into service. Offering self-cleaning action…
Eurotek Multipurpose cleaner is a low-foaming formula that acts quickly to remove, dirt, grime, grease, stains, and adhesive from all surfaces. • Low Foaming Formula. • Non-corrosive. Packing Available 500 ml 5 ltr 20 ltr, 200 ltr Case Pack 24 Can 4 can 1 barrel
Eurotek Multipurpose Lube is a water-resistant, multi-purpose lubricant gel that is a specially formulated blend of high-quality synthetic oils with anti-wear additives, friction modifiers, and tackiness agents. Eurotek Multipurpose Lube Spray non-drip gel penetrates deeply into vital areas and forms a water-resistant, long-lasting lubricant gel. • Resists cold, hot, and saltwater wash-off and high-temperature sling-off. • Non-drip gel that reduces…
Eurotek natural degreaser is a unique biodegradable heavy-duty cleaner/degreaser that removes grease, oil, and dirt.it is a non-corrosive, non-abrasive, non-staining, and Non-flammable cleaner and degreaser for all washable surfaces. From a full-strength degreaser to an all-purpose cleaner. • 100% Biodegradable. • Non-Corrosive. • Non-chlorinated. • Non-flammable. • Does not damage plastic and rubber parts. Packing Available 500 ml, 700 ml…
Eurotek Non-Silicone Mold Release Spray is a heavy-duty mold release agent formulated to provide maximum releases due to its high quality and higher oil content and minimize sticking and other causes for rejections. It allows easy removal of parts from molds due to its inherent anti-stick nature and improves the surface finish of molded parts. • High-quality heavy-duty formula prevents…
Eurotek Open Gear Lube spray is a heavy-duty, highly adherent lubrication and protective coating suitable for all weather conditions and extreme pressure applications. This lubricant is elastic, and stringy and leaves a tacky film that clings extremely well, making this product ideal for open gears. Open Gear Lube dries quickly and prevents dust contamination and dripping. • Effective for underwater…
Eurotek Heater Cleaning Spray is a highly active neutral cleaning agent in the aerosol form. The neutral active foam removes all kinds of deposits from the surface of primary heaters on Texturizing Machines and Godets on Spinning Machines. The overall cleaning process is free from any surface particles ensuring no possibility of any physical damage to the delicate heater and…
Eurotek Paint & Gasket Remover is a fast-acting blend of solvents for the removal of paints, gaskets, adhesives, sealants, lacquers, and varnishes without excessive scraping or causing damage to the surfaces. It also cleans stubborn grease, oil, varnish, and carbon deposits. Remove Oil, Grease, Dirt, and other contaminants. • Removes gaskets, paints, sealants, varnishes. • Fast-acting formula cleans dried grease…
Eurotek Paint & Gasket Remover(W) is a Water Based Paint Remover is non-hazardous paint and coating remover, with zero V.O.C. that can be used for interior and exterior applications. Eurotek paint & gasket remover(W) does not contain any methylene chloride or caustic. This truly unique, water-based remover can be used to remove multiple coats of latex, acrylic, urethane, varnish, lacquer,…
Eurotek Pickling Paste is a light green color paste for the treatment of corroded, heated, or welded austenitic stainless steel surfaces or welding seams. Metals other than austenitic stainless steel will be corroded by the strong pickling effect of the product. Nickel, nickel alloys, and copper-nickel alloys may also be pickled with Eurotek Pickling Paste (always test first!). Also Available…
Eurotek PTFE Lube is a fast air-drying formulation of polytetrafluoroethylene (PTFE) solid film lubricants. It offers ultra-high lubricity when applied to a variety of surfaces and exhibits excellent anti-stick properties. It prevents metal-to-metal contact under extreme temperatures and pressure conditions and provides complete protection against wear, friction, and corrosion. • Lowers friction, and prevents galling and seizure. • Does not…
Eurotek red dye Penetrant is a solvent removable, post-emulsifiable visible penetrant and used to locate cracks, laps, pores, lack of bonding, and similar surface discontinuities. Eurotek Red Dye Penetrant can be used on nonporous parts including both ferrous and nonferrous metals, ceramics, and glass. • Brings flaws into sharper, clearer focus with more intense color. • Performs more reliably over…
Eurotek red dye Penetrant (W) is a water-washable and solvent-removable visible penetrant used to locate cracks, laps, pores, lack of bonding, and similar surface flaws. Eurotek red dye Penetrant (W) can be used on nonporous parts including both ferrous and nonferrous metals, ceramics, glass, and some plastics. ∙ Brings flaws into sharper, clearer focus with more intense color. • Performs…
